Wrench ClinicGet a quote

Oil Filter: How to Choose the Right One for Your Car

An oil filter is the canister or cartridge that removes dirt and metal particles from your engine oil before it reaches the bearings. This guide shows you how to match the right one to your car, what to check before buying, and when to hand the job to a mechanic.

It sits alongside our oil and oil changes guide.

Key points

  • Match the oil filter to your exact engine, not just the car model, because different engines need different filters.
  • Your owner handbook is the first place to confirm which filter specification suits your car.
  • Short trips, dust, stop-and-go traffic and extreme temperatures clog the filter faster than steady motorway driving.
  • Very cheap filters can use thin metal, loose media and poor gaskets, which raises the risk of failure.

What you need to choose an oil filter

Gather these details before you search for a part. Each one narrows the choice and avoids a filter that does not fit.

ItemWhat to checkWhy it matters
Owner handbookThe filter specification or part reference listed for your engineIt confirms compatibility and removes guesswork between similar-looking filters.
Engine size and codeCapacity in litres and the engine code on the handbook or under the bonnetModels often share a name but use different engines with different filters.
Fuel typePetrol or dieselDiesel and petrol engines often use different filters, so confirm the correct one for your engine.
Old filterThe part number printed on the canister or housingA matching number is a quick cross-check against the new filter.
Filter styleSpin-on canister or replaceable cartridge in a housingA cartridge needs its own seals, and the wrong style will not fit.
Seals and washersNew sealing ring on the filter or housing and a fresh drain plug washerOld seals can leak, and a leak can drain oil from the sump.

How to choose the right oil filter

Work through these steps in order and you will end up with a filter that suits your engine and your driving.

  1. Check the owner handbook first. Look up the service section for the filter specification for your engine. Different engines require different filters.
  2. Confirm your exact engine. Note the engine size, fuel type and engine code, not just the model name. A parts counter or online catalogue needs these details.
  3. Compare the part number. Read the number on your old filter and compare it with the new one, or with the maker's cross-reference. If the numbers disagree, check the fit before you buy.
  4. Inspect the build quality. Feel the weight of the canister and check the gasket sits flat and intact. Lower-cost filters can contain light-gauge metal, loose material and poor gaskets.
  5. Match it to how you drive. Frequent short trips, dusty roads, stop-and-go traffic and extreme temperatures load the filter faster. If that describes your driving, change it on time with every oil change.
  6. Buy it with the oil. Get the oil, filter and new washer together so the job is done in one go. Our guide to which engine oil to use covers the oil side.

Oil filter types compared

Most filters look similar, but the internal parts differ. This table explains what each feature does.

FeatureWhat it doesWhat to look for
Spin-on canisterSealed metal can with the filter media inside, replaced as one unitA sturdy can and a gasket that sits evenly in its groove.
Cartridge elementPaper or fibre element that sits in a reusable housing on the engineNew seals supplied with the element, ready to fit.
Bypass valveOpens when the media is clogged or the oil is cold and thick, so oil still circulatesA valve built for your engine, not a generic substitute.
Filter sizeHolds the media and fits the mounting spaceFit to the engine, since oil flow depends on engine conditions, not filter size.
Lower-cost filterDoes the same job on paper, but may use thinner partsLight metal, loose media or poor gaskets are warning signs.
Diesel pre-fillingSome people fill the filter with oil before fittingOn diesels, a pre-lube system is recommended instead of pre-filling.

When to change your oil filter

Change the filter whenever you change the oil, and check the handbook for your service schedule. Harder use means the filter works harder.

SituationEffect on the filterWhat to do
Frequent short tripsContaminants build up before the engine fully warmsFit a new filter at every oil change, without stretching the gap.
Dusty conditionsMore fine dirt reaches the mediaChange the filter on time and consider a shorter interval.
Stop-and-go trafficEngine runs long hours at low speedTreat it as heavy use when you read the service schedule.
Extreme temperaturesCold thickens oil and heat ages it fasterKeep to the schedule and do not delay the filter.
Oil change dueOld oil leaves dirt in a used filterReplace the filter every time the oil is drained.
Unknown service historyYou cannot tell how clogged the filter isChange oil and filter together, then keep a record.

Common oil filter mistakes

When to call a mechanic for your oil filter

A qualified mechanic is the better option in these cases, especially when access or the correct part is unclear.

Frequently asked questions

Do I need to change the oil filter every time I change the oil?

Yes, that is the usual approach. The old filter holds dirt and contaminated oil, which would mix with the fresh oil if left in place.

Check your handbook for the service schedule that suits your engine and driving.

Does a bigger oil filter give better protection?

Not necessarily. Oil flow is controlled by engine operating conditions, not filter size.

The correct filter is the one specified for your engine, so use the handbook to confirm the fit instead of choosing the largest one.

What does the bypass valve do?

The relief or bypass valve opens when the filter media is clogged or the oil is too cold and thick. That lets unfiltered oil circulate instead of no oil at all, which is better than starving the engine.

Are cheap oil filters safe to use?

Some are fine, but lower-cost filters can contain light-gauge metal, loose filter material and poor-quality gaskets, which can lead to failure. Choose one that matches your engine specification and feels solidly built rather than buying on price alone.

Book an oil filter change with Wrench Clinic

If you would rather not guess at the part, we can send a qualified mechanic to carry out an oil change and filter replacement. They will match the filter to your engine and fit new seals.

Get a quote and tell us your car and engine, and costs vary by job.

Related guides

Request a quote

Tell us what you need and we will get back to you.