Wrench ClinicGet a quote

Mobile Tyres: What a Mobile Tyre Fitter Can Do (2026)

Mobile tyres are a fitting service where a mechanic brings the equipment to your home or workplace and changes or repairs tyres on the spot. This guide covers what mobile tyre fitting can handle, what still needs a workshop, how to prepare, and how to avoid common problems.

It is split by job, so you can go straight to the one you need.

Key points

  • Mobile tyres suit fitting, replacement, puncture assessment and roadside call-outs, because the van carries a tyre machine and balancer.
  • Wheel alignment needs a fixed rig and a level floor, so it is normally a workshop job rather than a mobile one.
  • Safe, level, dry ground and clear access to every wheel make the visit quicker and the result better.
  • Get a written quote that lists tyre size, speed rating, valve, balancing and disposal before you agree to the work.
TermMeaningWhy it matters
Mobile tyre fitterA mechanic who fits tyres from a van at your locationSaves a trip to a garage and a wait in reception
BalancingAdding small weights so the wheel spins evenlyPrevents steering wheel vibration and uneven wear
Run flat tyreA tyre with a strengthened sidewall that carries the car after a punctureNeeds a fitter who has the right equipment and checks
Locking wheel nut keyThe special socket for anti-theft wheel nutsWithout it, the wheel cannot come off

Mobile tyres for new tyre fitting

A fitter can swap worn tyres on your drive. Have the details ready so the right tyres arrive on the van.

  1. Read the size from the sidewall, for example width, profile and rim diameter, and give it to the fitter exactly as printed.
  2. Tell the fitter the speed rating and load index shown on the sidewall, or on the door jamb sticker, so replacements match the originals.
  3. Fit tyres on the same axle as a matching pair as a minimum, and check the tread depth on the other axle.
  4. Ask whether new valves are included in the quote, because rubber valves perish and are cheap to replace while the wheel is off.
  5. Check that wheel balancing is part of the visit, as an unbalanced wheel causes vibration at motorway speeds.
  6. Confirm that the old tyres will be taken away for disposal or recycling.

Mobile tyres for punctures and roadside problems

A mobile call-out can be the safest option when a tyre goes flat. The fitter first decides whether the tyre can be repaired.

  1. Stop somewhere safe, switch on your hazard lights and keep passengers well away from moving traffic while you wait for the fitter.
  2. Do not drive on a flat tyre to reach home, because the sidewall can be damaged beyond any repair.
  3. Expect the fitter to remove the tyre from the wheel to inspect the inside, rather than plugging it from the outside only.
  4. Accept that damage to the sidewall or shoulder usually means replacement, as those areas flex too much for a safe repair.
  5. Tell the fitter if the tyre is a run flat, since these are generally limited to about 50 miles at no more than 50mph after a puncture, and your handbook gives the figure for your car.
  6. Keep the locking wheel nut key in the glovebox, so the fitter can start work as soon as the van arrives.

Mobile tyres for wheel alignment and tracking

Alignment is the main job a van cannot do well. It needs a fixed rig and a level floor, so book a workshop for it.

  1. Book a workshop for alignment after new tyres if the car pulls to one side or the steering wheel sits off-centre.
  2. Ask for a printout of the readings before and after the adjustment, so you can see what was changed on each wheel.
  3. Have the suspension and steering joints checked first, because worn parts stop an alignment from holding its settings.
  4. Read our guide to wheel tracking to understand the symptoms of poor alignment before you book.
  5. Compare quotes using the costs in our wheel alignment cost UK guide, since prices differ by job.
  6. Mention any recent kerb strike or pothole hit, as this can explain sudden changes in steering feel.

Mobile tyres cost

Tyre prices depend on size, brand and speed rating, so a written quote matters more than a headline figure. Alignment is usually booked separately at a workshop.

JobWhat to know
Alignment, front and rearDrivers in the UK can expect to pay around £80-90 to have their front and rear tyres realigned.
Alignment, front onlyFor a front wheel alignment only, the average price is £49.03.
Tyre fitting at homeVaries by tyre size and brand, so get a quote
Puncture call-outVaries by location and time, so get a quote
Run flat tyre replacementVaries by size and stock, so get a quote
Valve and disposal chargesAsk whether they are included or listed separately

Mobile tyres for checking pressure and offers

Correct pressure protects the new tyres, and offers can cut the bill if you check what is included.

  1. Check pressures when the tyres are cold, using the figures in the handbook or on the door jamb sticker.
  2. Read when should tyre pressure be checked to set a routine, such as monthly and before long trips.
  3. Look up your model, for example the Mini Cooper tyre pressure guide, if you need figures for a specific car.
  4. Compare any car tyre offer on fitted price, including balancing, valves and disposal, not only the tyre.
  5. Ask whether the fitter resets the tyre pressure monitoring system after the change, if your car has one.
  6. Check the tread depth on each tyre afterwards, and note the date of fitting for your records.

Best practices for a mobile tyre visit

Park on level, dry ground

Leave the car on firm, flat ground with the handbrake on. A sloping or soft surface makes jacking unsafe, and the fitter may refuse to start.

Clear access to every wheel

Leave space around the car for the van, the machine and the jack. Move other vehicles, bins and bikes before the arrival window begins.

Find the locking wheel nut key

Locate the key before the visit. If it is lost, tell the fitter in advance, because removing a locking nut takes time and special tools.

Check the work before they leave

Look at the tyre sizes on the sidewalls and the valve caps. Ask the fitter to confirm the wheel nuts were tightened to the car maker's torque.

Re-check the nuts after driving

Ask whether the fitter advises a nut re-check after a short drive. Many do, and it takes a few minutes with a torque wrench.

Frequently asked questions

Can a mobile fitter do wheel alignment?

Not normally. Alignment needs a fixed rig and a level floor, which a van cannot provide.

Mobile fitters can change and balance tyres, but you should book a workshop for tracking and alignment adjustments.

Are mobile tyres more expensive than a garage?

Costs vary by job, tyre and location. A call-out may add a charge, but you save travel and waiting time.

Get a written quote that lists tyre, fitting, balancing, valves and disposal.

Can a mobile fitter repair a puncture?

Often yes, if the damage is in the central tread area and the tyre is inspected from the inside. Sidewall or shoulder damage normally means replacement.

The fitter will tell you which applies.

What if it rains on the day?

Light rain rarely stops a fitting, but heavy rain, ice or a waterlogged surface can make the work unsafe. Tell the fitter if you have a covered space, and expect to rebook if conditions are poor.

Book a mobile tyre fitter with Wrench Clinic

If your tyres need replacing or you have a puncture, we can send a qualified mechanic to your home or workplace. Give us your tyre size, registration and location, and ask for a written quote that covers fitting, balancing, valves and disposal.

Get a quote to start, or read the wider tyres and wheels guide first.

Related guides

Request a quote

Tell us what you need and we will get back to you.